You can polish the surfaces to refresh. Here is a practical polishing recommendation.
If you have never experienced polishing before, you should try on a small surface. The simplest method of polishing is the spray tube. In addition to this, you can apply the sprayer you bought to the spray gun. When applying, first polish the inner edges, then the outer edges, and finally the surface portions. In order to avoid stains when performing these operations, do not forget to apply parallel lines.
How to make wood?
To avoid damage to the table, obtain a metal-free brush suitable for your hand.
From the point of view of your homemade soiling and your health, if possible, take it out into an open area to polish your desk. If you do not have open space, open the house windows.
To avoid damage to the other furniture and to work comfortably, keep the floor around the table to be polished.
To protect your floor from dust and varnish stains that may occur during sanding and polish before polishing, use newspaper or nylon as a protective under the table.
Clean your back with warm water and a soapy cloth. When you practice this application that will make the wood plump, make sure that the amount of water in the cloth is not too much.
After you have dried the table, sand your desk towards the direction of the wood fibers. Be careful not to apply too much pressure to the surface during sanding.
After cleaning the abrasive dust, proceed to polishing.
Spread the varnish in the direction of the wood fibers in order to process all the pores of the board.
Make sure that the brush you get your brush is too thick.
Take care to make the varnish fast.
Make sure your arm does not touch the mask during polishing.
The brilliant image of the goods you wax will change the air of your home.
Comments
Post a Comment